Hộp Modular cho Hotend & Phụ Kiện Bambu Lab P/X Series

Rugged box with satisfying snap clasps, designed to accommodate modular inserts for storing various Bambu Lab hotends and accessories. Included inserts are designed for P1S, P1P, X1C and X1E hotends and accessories.

Also included is an Autodesk Fusion 360 template file, so you can create your own cutouts.

Key Features

• Rugged box design

• Strong snap-fit clasps

• Modular insert design

  • Customize your layout

• Print only the boxes you need

• Autodesk Fusion 360 template file included

Included on separate plates:

• Main box body (PLA)

• Box lid (PLA)

• Clasps (PETG recommended)

• Nozzle Wipers (PLA)

• P/X Series Complete Hotend (PLA)

• P/X Series Hotend (PLA)

• P/X Series Extruder Gear Assembly (PLA)

• Open box (PLA)

• Extra hotend socks (PLA)

• Blank template (edit this as you please)

• Walls (PLA)

• Optional Gasket (TPU)

Model Print Recommendations

Most parts can be printed in PLA, even the clasps, however printing the clasps in PETG is recommened since it bends easier. The gasket is entirely optional, but should be printed in TPU 95a if you choose to print it.

Assembly

Use M3, 30mm machine screws* (x6) for hinges and latches.

Put the bottom and right walls in first. Then place in each section one at a time from bottom-right, to bottom-left, then top-right to top-left. Then complete it by placing the left and top walls into place. It should be a snug fit but not too snug. If you print with suggested materials it should fit perfectly.

* I earn a tiny insentive from the Amazon affiliate link, it does not increase your cost.

Printing Recommendations

• Always dry your filament before printing, for best performance.

• I have had excellent success using Bambu Lab Textured PEI plate.

• Always wash your plate with quality dish soap, removing residue with 99% Isopropyl Alchol (IPA).

• Bambu Lab filament is recommended.

Buy me a coffee

Buy me a coffee ☕https://buymeacoffee.com/papamaker

Disclaimer & Liability Waiver

This 3D model and any associated files are provided “as is”, for personal use only, without warranty of any kind, express or implied. The designer makes no guarantees regarding fit, strength, durability, or suitability for any specific tools or use case.

3D printed parts may vary significantly based on printer calibration, filament type, print orientation, slicer settings, and post-processing. Improper printing, assembly, or use may result in damage to tools, property, or personal injury.

By downloading, printing, or using this design, you acknowledge and agree that the designer shall not be held liable for any direct, indirect, incidental, or consequential damages arising from the use or misuse of this model.

Use at your own risk.