Vỏ DC-DC Boost Converter XL6009

By agmcmll

Downloads: 16
Likes: 5
Views: 97
Remixes: 0
Comments: 0

Download all (.zip)· 2 files · 196.8 KB· 196.8 KB

Files 2 196.8 KB

Boost_Converter_xl6009_Case_-_Cover_1772149379.stlSTL · 31.1 KB
Boost_Converter_xl6009_Case_-_Base_1772149380.stlSTL · 165.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #227870
Category: DIY
Published: 02/27/2026
License: Creative Commons — Attribution

Description

A case with a tapered press fit cover and screw mounting for a xl6009 dc-dc boost converter board.

Either M3 or #4-40 will self tap into the mounting holes for the board. The lid is a tapered press fit.
I didn't include mechanical strain relief, there are narrow slots to allow the in and out wire pairs to pass. I used a dab of hot glue on the inside as my strain relief, you could also use knots in the wire, or a zip tie.

There are some different variations of this board, so I designed this case to fit the larger of the two I've seen. The small boards still fit, but only one screw can be used, which works fine anyway. See internal dimensions and hole spacing here: