Đầu gắn Landmine cho thanh đòn Olympic (Olympic Barbell Landmine Attachment)

It is a landmine for various excercises using your 2" olympic sized barbell.

Works as a Landmine Base or a Landmine Grip

Usage

• Just slide this landmine over the end of your barbell, and excercise.

• When you are done working out, use the hole on the top to hang it somewhere convenient.

Printing & Materials

• Material: Print it with TPU or other rubber filament to be sure your barbell won't slip on any surface.

• No supports needed: Just print with the flat on the ball sitting on the build plate.

• Scalable: Scale it to 50% size and it will fit you 1" standard barbells too.

Tips for Printing TPU

• Slow it Down: Print speed should be slow, like 60mm/s

• Big Hole: Print Nozzle should be a little bigger to avoid clogs, try 0.6mm

• Ditch the Friction: TPU needs low friction to print or it binds and streteches, giving an uneven diameter to your filament as it feeds. To resolve this, feed the filament directly into your print head, avoiding the bowden tube. Additionally, try using a low friction spool holder (like this) and/or an overhead spool holder (like this) if possible.