Universal Molle Clip (Kẹp Molle đa năng)

This was created as an easy, modular way of attaching hardware to Lasercut/ Molle. The clips lock safely, should stand up to quite some abuse and will stay open if mounted flush. Use these at will for your own projects if you'd like to save some time.

Parts were designed with PETG in mind. I do not recommend PLA due to the higher stiffness it provides, making the clips difficult to open and close. Other materials like ABS and PA should work too but have not been tested.

There’s left and right side versions, although they only differ in which way the screw for the hinge is installed.

Assembly

Each clip needs:

• 1x M3x16 or M3x20 screw

• 1x M3 threaded insert, 3...6mm length (optional)

After some testing, I've now added a direct thread version that omitts the use of a threaded insert. It works just as well, since the hinge shouldn't need to be disassembled often. The insert version remains available.

For assembly, refer to the picture.

Ecosystem

• magazine pouch

• grenade pouch

Should you have a design for the ecosystem, please add the "molleclipsystem" tag to your thing, send me a message and I will add it here.

Feel free to write me a message or leave a comment if you have an issue or question. Feedback is always welcome.