Giá đỡ điện thoại và camera DJI Osmo Pocket 3

You'll need two screws (20mm long) and two M5 nuts. One is a 1/4-inch screw, the extension rod from the camera kit with a 1/4-inch thread, and a tripod with a 1/4-inch thread.

Rubber bands are required for operation; we attach them using the hooks. Adjust the number, thickness, and tension to your preference.

After assembling the rubber bands, it's best to glue the holder to the guide rail. The second gluing is for the base and guide rails. You can use M3 nuts and screws embedded in plastic, but I had a little trouble.

The model is in the testing phase, if anyone has any suggestions, I am waiting for messages