Adapter gắn Solar Filter cho Sony SEL55210 (Hood Mount)

This is a hood-mount solar filter adapter designed specifically for the Sony SEL55210 (E-mount APS-C).

The adapter locks directly into the original lens hood bayonet groove, allowing the use of an existing full-aperture solar filter originally made for a 130 mm Newtonian telescope.

Instead of using filter threads, this design utilizes the hood mounting interface for quick installation and secure positioning.

The solar filter is retained inside the adapter body by four integrated snap-lock tabs, preventing accidental выпадение during use.

Features

• Designed for Sony E 55-210mm f/4.5-6.3 OSS

• Uses original hood bayonet groove

• No modifications to the lens

• Accepts an existing 130 mm Newtonian solar filter

• 4 snap tabs securely hold the filter

• Quick mount / quick removal

• Lightweight construction

Installation

1. Insert the solar filter into the adapter.

2. Ensure all four snap tabs are fully engaged.

3. Mount the adapter into the hood slot as you would mount a lens hood.

4. Confirm secure lock before solar use.

⚠ Important Safety Notice

This adapter must only be used with certified front-mounted solar filter material (e.g., Baader AstroSolar or equivalent).

Always:

• Inspect filter material for damage.

• Verify secure locking before pointing at the Sun.

• Never observe the Sun without a proper solar filter.

Use at your own risk.

Recommended Print Settings

• PETG / ASA recommended

• 0.2–0.28 mm layer height

• Supports are required

• 30% infill in locking interface