Giá gắn FPV VTX kèm quạt làm mát (parametric OpenSCAD)

This is an OpenSCAD parametric model for mounting an FPV video transmitter and optional cooling fan to RC vehicles. I will primarily use this for mounting the VTX to fixed wing aircraft, but it should work equally as well for RC rovers and boats. I designed the model to be printed in TPU or PETG/PLA. The fan and VTX are attached to the print using threaded inserts. The file is currently defaulted to the following settings:

VTX: AKK Race Ranger (30.5x30.5) spacing
Fan: 40mm PC fan
Hardware: M3 screws and threaded inserts

You should be able to adjust the model to fit just about any VTX and fan. If you only need a flat mount with no fan mount, just print the base and you're good to go.

The OpenSCAD model has 3 rendering views, Full Assembly, Base and Inverted Fan Plate. You can select the different views to render and print.

If you want to see other FPV related parametric models, check out my GitHub repo: https://github.com/wbhinton/FPV-Parametric-Library