Skip to main content
F3D
Hộp dự án ESP8266 cho cảm biến BME680 ESPHome 1

6 images

DIY

Hộp dự án ESP8266 cho cảm biến BME680 ESPHome

By withanHdammit

Downloads
45
Likes
8
Views
915

Files 7 30.1 MB

  • BME680_ESP8266_box_with_tabs_1765529863.stlSTL · 1.2 MB
  • BME680_ESP8266_box_no_tabs_1765529864.stlSTL · 898.9 KB
  • BME680_ESP8266_resin_box_with_tabs_1765529865.stlSTL · 1.3 MB
  • BME680_ESP8266_resin_box_no_tabs_1765529866.stlSTL · 956.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

The box will work for pretty much any ESP8266 project, it's designed around the ElectroCookie 1/4 solderable prototype board.

The board mounts to the box with M2x5 screws

The magnets are sized for 2mmx5mm Neodymium. Make sure you get the polarity right when gluing the magnets to the box... ask me how I know LOL

The ESPHome code for the BME680 sensor is at https://github.com/withanhdammit/ESPHome-BME680

Print Settings

Printer Brand:

Anycubic

Printer:

Kobra 2

Rafts:

Doesn't Matter

Supports:

No

Resolution:

.2mm

Infill:

n/a

Filament: Any PLA/PETG/ABS White

Notes:

I've included a file for resin printing as well, with vents along the bottom edge to prevent suction cupping. It will still have a small suction cup effect for the magnet spots on the box, it hasn't affected the prints for me.

How I Designed This ===================

Built in Fusion360

Category: Electronics

Read more Show less

Print spec

Formats
f3dstepstl
Model files
7
Total size
30.1 MB
Largest file
16.6 MB

0 comments

See all