
Giá đỡ camera Ubiquiti UVC-G3-Flex cho tường Styrofoam
- Downloads
- 0
- Likes
- 0
- Views
- 0
- Remixes
- 0
- Comments
- 0
Files 3 1.1 MB
- uvc-g3-flex_1766603899.pdfPDF · 26.2 KB
- uvc_g3_flex_mount_cap_1766603897.stlSTL · 86 KB
- uvc_g3_flex_mount_base_1766603898.stlSTL · 1,010.7 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #22222
- Category
- Đồ Gia Dụng
- Published
Description
Why?
I had to mount these cameras on a building that is insulated with Styrofoam (this probably has a more accurate translation) - one can't just drive a screw into that, instead a special “screw” needs to be used (I used a “Fischer FID 25 x 50”). The camera in the PWM case (bought separately) had no mounting option for those.
Features
- Allows to securely mount a G3 Flex camera in a PWM case to a “soft wall”
- Takes a CAT6 ethernet cable
- Simple and fast to print (0.3 Layer Height)
- No Supports
- Guides the ethernet cable down from the wall, preventing water from being guided inside the wall
Print settings
- No supports (poke, cut or drill the screw holes out after printing)
- Use a UV resistant material - I used PETG, PLA is not recommended due to it's "give"
- 0.3 mm layer height
- 0.45 mm wall width
- 15% infill
Bill Of Materials
For one mount you'll need:
Item
Qty
Description
Fischer FID 25 x 50
2
Screw that can go into the Fischer (i.e. 4mm wood screw)
2
DIN 912 M3 x 12mm
2
Heat inserts M3 x D4.6 x L4.0
2
Ones that are L5.0 or D5.0 should work al well
uvc_g3_flex_mount_cap
1
Printed
uvc_g3_flex_mount_base
1
Printed
Source
Onshape (made the original part in Fusion, tried to transition but got back to Onshape fast)
Print spec
- Formats
- pdfstl
- Model files
- 3
- Total size
- 1.1 MB
- Largest file
- 1,010.7 KB
0 comments
You may also like 12 models
See all-

-

-
New -
New -

-

-

-

-

-

-
New -


