
Vỏ Heltec V4 có GPS, pin 18650 và công tắc
- Downloads
- 18
- Likes
- 3
- Views
- 162
- Remixes
- 0
- Comments
- 0
Files 6 726.5 KB
- back_external.stlSTL · 114.6 KB
- front_external.stlSTL · 181.5 KB
- buttons.stlSTL · 64.7 KB
- buttons.stlSTL · 64.7 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #221591
- Category
- Dụng Cụ Tiện Ích
- Published
Description
Case for Heltec LoRa32 V4 - https://www.aliexpress.com/item/1005010609328381.html
-
GPS module
-
simple antenna
-
18650 battery (soldered leads)
-
mini slide switch https://www.aliexpress.com/item/1005005508763350.html
Inspired by https://www.printables.com/model/1533100-heltec-v4-18650-compact-case/comments
Instructions:
-
Print with no supports, placed with long faces on the plate. (Tested with PLA and PETG)
-
Insert buttons from the inside into the front part. The shorter one is for reset.
-
Connect power connector
-
Bend the GPS and antenna cables - note that the LoRa antenna is on the opposite side from the WiFi antenna on the display
(ignore the stripped LoRa antenna connector... it works with the connector too). -
Slide the components into the front part.
-
Slide in the 18650 battery and insert the switch (with wires soldered to the power cable from the kit) into the back part.
-
Slide the parts together and secure with a key ring.
Print spec
- Formats
- stl
- Model files
- 6
- Total size
- 726.5 KB
- Largest file
- 181.5 KB
0 comments
You may also like 12 models
See all-

-

-
New -

-

-
New -

-

-

-

-

-


