
Nền Mech Tương Thích Lego (Lego Compatible Mech Platform)
- Downloads
- 1
- Likes
- 1
- Views
- 92
- Remixes
- 0
- Comments
- 0
Files 14 1,018.6 KB
- ladder_holder_1771204783.stlSTL · 16.7 KB
- rodsandholes_1771204784.scadSCAD · 4.7 KB
- printer_settings_1771204785.scadSCAD · 305 B
- rect_frame_1771204786.stlSTL · 109.1 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #221419
- Category
- Đồ Chơi Ngoài Trời
- Published
- License
- OCL
Description
Yes yet another simple mech platform, but wanted to customise sizes so implemented in SCAD. Then noticing the similarity of the pillers to lego thought making them compatible would be cool. The slots for the ladders also allow for card to be used instead so you can go mad with printing more decorative stuff.
If you print a couple of frames and floors the same size you and lock them together and stow the pillers, ladders and stuff inside.
The things are in LMechPlatform.scad and some instructions are in the file. Hopefully the naming of modules and parameters is meaningful, but you should be able to just play about with the parameters in the modules to see what they do. By my convention I implment the module after the code (commented out when not wanted) but feel free to put the module calls at the top of the file if you want to.
The include files are my standard things for drilling holes and rods the right size (rodsandholes.scad) and an algorithm for getting walls to be an integer number of threads thick (thread_calc.scad and printer_settings.scad) if you put your nozzle diameter and layer height in the printer settings file thread_calc does the calculation based on the rectangle and 2 semi circles model. You may need to bully your slicer into making it do the simple thing though (advanced sttings in Slic3r set the thread width to nozzle_diameter + layer_height).
Print Settings
Printer:
mofified Mendel
Rafts:
No
Supports:
No
Resolution:
0.4mm nozzle 0.2 layer height
Infill:
grid
Category: Toy & Game Accessories
Print spec
- Formats
- scadstl
- Model files
- 14
- Total size
- 1,018.6 KB
- Largest file
- 214.2 KB












