
Vỏ case CBT cho bàn phím Corne với góc 7.5 độ
- Downloads
- 0
- Likes
- 0
- Views
- 0
- Remixes
- 0
- Comments
- 0
Files 10 8.4 MB
- CBT-Top_1766669695.STLSTL · 674.1 KB
- CBT-Top_1766669696.SLDPRTSLDPRT · 2.1 MB
- CBT-Top-10_1766669697.STLSTL · 704.3 KB
- CBT-Top-15_1766669698.STLSTL · 732.4 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #22138
- Category
- Dụng Cụ Tiện Ích
- Published
Description
This is a Corne v2.5 PCB from Keebmaker (originally by foostan)
https://www.adafruit.com/product/805 for the switch
https://www.amazon.com/dp/B08214DJLJ for the battery
I've added 10 & 15 degree tents as well.
I used M2.5x10mm screws, M2.5 nuts, and M2.5 heat-insert nuts to connect the Top and Base.
I used simple 3M picture framing velcro to attach the battery to the base so I can remove it easily if I ever switch cases.
There's a push-fit window for the switch to sit in.
The downward-facing LEDs bleed through the case so a transparent material would look really good. May reprint with transparent filament.
Credit to https://www.thingiverse.com/thing:5027615/files for making .step file available, which I heavily modified. So much that it's hard to call this a ‘remix.’
Mirror the files for the left side.
Update 9/7/2023: I made the thicker variant which is much more sturdy and is built for M3 inserts instead of M2.5.
Print spec
- Formats
- sldprtstl
- Model files
- 10
- Total size
- 8.4 MB
- Largest file
- 2.1 MB












