FFBeast DIY Wheel – Bánh xe DIY

Using this template to drill 5 mm holes in motor case: 

Central hole in motor case is 14 mm.
Thru hole in motor shaft is 4 mm.
Hole in shaft to mount encoder is 6.5 mm.
Electronics - ODESC v4.2,
Encoder - MT6825.
Bolts to mount adapter to wheel and motor case - M5x20

A part of the hoverboard, cut to size, was used as a base for mounting.
M4 holes should be drilled in the base to attach the legs and the resistor.