Ống xả Elegoo Centauri Carbon 2 (Exaust Pipe) - tuỳ chọn fan/duct/HEPA
- Downloads
- 37
- Likes
- 15
- Views
- 347
- Remixes
- 2
- Comments
- 0
Files 22 26.2 MB
- Exhaust Pipe.stlSTL · 3.4 MB
- Straight Exaust Pipe -cc2 to 100mm duct- - 100mm output.stlSTL · 1.5 MB
- Straight Exaust Pipe -cc2 to 120mm duct- - 120mm output.stlSTL · 2.2 MB
- Straight Exaust Pipe -cc2 to 125mm duct- - 125mm output.stlSTL · 2.4 MB
Make a variant with AI
Build another version of this model.
Remix versions 2
Bộ chuyển đổi và ống thoát khí 3 inch cho Elegoo Centauri Carbon 2BylilFonsi · 06/03/2026
Ống thoát khí kèm bộ lọc Centauri Carbon 2ByIDK__3497308 · 03/21/2026
Details
- Model ID
- #219507
- Category
- Máy In 3D
- Published
- License
- GNU General Public License v3.0
Description
This is my first time designing somthing in cad and its certainly my first time uploading somthing here! I hope you like what ive made
The exhaust fan on the CC2 even tho its now a 120mm fan is still a bit weak and noisy, also the in built hepa filter is only used for the filaments that need it, i wanted some more options, so i made this
First of all the exhaust is as wide as possible for max airflow, it also is vertical so even when the fan is off or on low the natural tendency for heat to rise helps with air flow
once we clear the pipe we have options, you can just use the pipe as is, you can mount a 120mm fan there to help exaust the fumes/heat or you can mount the duct tip and exaust the exaust out a 100mm duct out a window, i also designed it to use this hepa filter mount
https://www.printables.com/model/669469-hepa-filter-h12h13-fc803801-150x120x25mm-activated
You will need to buy longer screws than mentioned in the above as the exaust panel is thicker than the panels in the design (if you are going the hepa filter rout ofcorse)
Youll also need to order the filters mentioned in the above listing aswell
You then have the option to just vent into the room or you can add on the hepa tip and attach a 100mm duct to it if you still want to exaust it out the window/room
I personally have mine set up with a fan and the hepa filter, the fan is there to help push the air through the filter as the stock fan lacks the pressure to do so creating back preassure
Combine the fan with a PWM controller to adjust the speed of the fan
Ive tried to think of everything you may want with the exaust but am happy to add more if needed
You will need some longer screws i went with 3x 10mm ones, m3 i believe oh and you can add in 2 magnets at the bottom aswell, 8x3mm rear earth are what ive used
It holds on strong and has made my cc2 quieter and more cleaner to be in the room with
Enjoy the exhaust! I look forward to seeing what you do with it!
Cheers
Print spec
- Formats
- stepstl
- Model files
- 22
- Total size
- 26.2 MB
- Largest file
- 3.4 MB

