Vỏ (housing) cho Multitester

I bought a universal multitester board on Aliexpress. I used it for a while, I liked the device, but it was inconvenient because there was no case. So I drew it and printed it on my printer. Along the way, we had to slightly change the design of the device in order to integrate it with the new case. I also replaced the battery with an iPhone X phone battery with an appropriate body kit so that it can be charged, as well as convert the battery voltage from 3.7-4.2 volts to 8-9 volts to power the device.

I also made a cover for the connector, since its native color did not match the color of the case. It got a little better, although not perfect. Unfortunately, it was not possible to completely make a new connector. The lid consists of two parts that need to be glued together. The third part was made because I came across connectors of a slightly different shape.

To assemble the case, I used M3 fused nuts. Flat-head screws and fused nuts per M2.5 were used to attach the additional board. All other body parts are assembled with glue.