Kẹp cho ống ptfe 4mm

I designed a small clamp for 4mm PTFE hose, in order to easy secure cables from my hot end to the hose using zip ties. It clamps on easy but is pretty hard to remove, meaning it wont release itself during print.

Print Settings

Printer:

Geeetech Prusa i3

Rafts:

No

Supports:

No

Resolution:

0.1mm

Infill:

doesn't matter

Notes:

Print a few at a time. I used ABS, but other filaments will work as well.

Category: 3D Printer Parts