Gá/Đế gắn remote Creality Heater cho Elegoo Centauri Carbon (ECC)

Remix of Giá đỡ remote heater buồng in Creality (Creality chamber heater remote mount) By Chrism9876_3262687

By TomHoeppner_3558719

Downloads: 2
Likes: 2
Views: 147
Remixes: 0
Comments: 0

Download all (.zip)· 3 files · 537 KB· 537 KB

Files 3 537 KB

heater_remote_mount_a_1770617910.stlSTL · 217.4 KB
heater_remote_mount_b_1770617911.stlSTL · 172.5 KB
heater_remote_mount_a-b_1770617912.3mf3MF · 147.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #215552
Category: Máy In 3D
Published: 02/09/2026
License: Creative Commons — Attribution
Tags: mount
creality
remote
heater
ecc

Show more tags Show fewer tags

Description

I took the Chitu mounting plate, removed the cradle for that remote and added an angled upright with holes for M3 screws. I made the back of the control cradle a little thicker to allow for recessing the M3 screws that attach the cradle to the base. I added mounting holes for M3x8 screws to the Creality remote control hoder as I didn't want to use tape for the attachment method.

You'll need 2 M3x12 screws to mount the base to the left-front corner of the Centauri Carbon. And you'll need 2 M3x8 screws to attach the control cradle to base. They will self-tap into the plastic. If you want to add threaded inserts you'll need to resize the holes in the base mounting block accordingly.

I printed this in PETG with a 0.4 nozzle and 0.2 layer height. I recommend supports for the base and overhang. I blocked supports for the screw holes.

I did all of the design work in TinkerCAD.
I hope you find this useful!