Bookmark Sói Tru (Howling Wolf Bookmark)

Overview

A striking howling wolf silhouette bookmark with layered colour accents and a moon highlight. Designed to print flat, support-free, and with crisp detail at fine layers.
This model is AMS-compatible (automatic colour changes), but an AMS is not required — you can print it on any single-extruder printer with simple manual colour swaps.

Printing Details

• Material: PLA

• Supports: Not needed

• Print orientation: Flat on the bed (large surface contact)

• Brim: Not required (clean plate recommended for best adhesion)

• Nozzle: 0.4 mm

• Layer height: 0.08 mm

• Base layer: 0.16 mm

• Infill: 100%

• Size: 50.03 × 150 mm 

• Thickness: 1.52 mm

Colour Changes (AMS or Manual)

The included 3MF has the colour changes configured. If you’re using an AMS, it will handle swaps automatically. If printing without an AMS, use these manual swaps:

• Start Black

• Layer 6 (0.56 mm): swap to Cyan

• Layer 9 (0.80 mm): swap to Sunflower Yellow

• Layer 14 (1.20 mm): swap to White for the rest

File Formats Included

• 3MF only (colour changes configured)

Variations

• None (single version)

Assembly

• None

Licence Notes

Personal use only. No reselling or sharing the files, and no selling printed copies.