Case Ender 3 Pro cho SKR Mini E3

By MrTeliP

Downloads: 725
Likes: 70
Views: 3,710
Remixes: 1
Comments: 0

Download all (.zip)· 12 files · 7 MB· 7 MB

Files 12 7 MB

Pi_4_box_shifted_right_1770590084.stlSTL · 441 KB
PG7-Umbilcal_1770590085.3mf3MF · 159.3 KB
skr_box_40x40_cover-01-18-2020_1770590086.stlSTL · 171.8 KB
skr_case_1770590087.stlSTL · 1.1 MB
Pi_4_box_1770590088.stlSTL · 439.8 KB
skr_box-01-18-2020_1770590090.stlSTL · 854.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

Ender 3 Pro BTT Rodent CaseByCGM_Makes_873013 · 02/09/2026

See all 1 remix

Details

Model ID: #212651
Category: Máy In 3D
Published: 02/09/2026
License: Creative Commons — Attribution
Tags: thingiverse
ender3
skr
bigtreetechskr

Show more tags Show fewer tags

Description

03-16-2020: I've been told by okalvo86 that the stock z axis cables are a little a couple cm short. Be aware of this before you build it and have a plan for extending or replacing your cables just in case yours are too short. I wouldn't know, my cables were mangled when I got my printer so I made my own.

STL THUMBNAILS ARE NO LONGER SHOWING UP. NOT SURE WHAT'S GOING ON.

IF ANYBODY HAS ANY SUGGESTIONS I'D APPRECIATE IT. THANKS!!!

I uploaded a version of the Raspberry Pi Box for the other side. This is something I am still working on so please let me know if you encounter issues or you find areas that don't fit properly. The lid for the Pi Box should just be a mirror of the SKR Box lid so I did not upload an STL. The Pi box has mounting holes for two buck converters, one for using 12V Noctua fans and the other to power the Pi.

In my setup I am using XT60 Y connectors I bought on Amazon: https://www.amazon.com/gp/product/B0179IODB2/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

The buck converters were also purchased on Amazon: https://www.amazon.com/gp/product/B01GJ0SC2C/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

I'm working on a mosfet box that will go in the back. The box will have an attached cable-chain option for the heatbed. It will also have space for a relay module for powering the printer on and off.

STEP files are included for people that wish to remix these parts.

This is for the Ender 3 Pro with the 40x40 extrusion on the Y axis. I will be putting up the STEP files so people can remix it for the original Ender 3 if they'd like.

I wanted a case for my Ender 3 Pro that would make the main board easily accessible. I also wanted the USB and SD card slot in the front, more forward than the stock case. This puts the SD card slot and USB forward of stock by ~50mm.

This case has a sliding lid for easy access and a 40mm fan that draws air from underneath and ports it through the vents in the front and through the lid over the motor driver heatsinks.