Skip to main content
F3D
Nuki Smart Lock PRO (Gen 5) - Adapter CH-Zylinder (Knob) 1

5 images

DIY

Nuki Smart Lock PRO (Gen 5) - Adapter CH-Zylinder (Knob)

Remix of Nuki Smart Lock Pro Gen 5 - Bộ Mounting Kit cho cylinder núm vặn (EVVA) By adissu_264189

By op00_18844

Downloads
36
Likes
1
Views
341
Remixes
1

Files 4 141.1 KB

  • NukiAdapterBaseExt_1770335976.3mf3MF · 27 KB
  • NukiAdapterKey_1770335977.3mf3MF · 19.8 KB
  • NukiAdapterBaseExtRing_1770335977.3mf3MF · 22.4 KB
  • NukiSmartLockPRO_5th_Gen_CH-Zylinder_Knob_1770335978.stepSTEP · 71.9 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Details

Model ID
#211859
Category
DIY
Published

Description

Prepare the Key Adapter
The key includes a cavity for an M3 threaded insert, allowing you to secure it with a set screw.

Install Threaded Inserts into the Base
The printed base has two holes designed for M4 threaded inserts. These provide mounting points for the Nuki-provided mounting plate.

Mount the Base to the Door
Attach the base using strong double-sided adhesive tape. Ensure proper alignment with the CH-Zylinder knob.

Attach the Nuki Mounting Plate
Use your own M4 screws to fasten the Nuki-provided (see pictures) mounting plate to the threaded inserts in the base.

Install the Key Adapter
Slide the adapter onto double flat shaft of the cylinder knob. Tighten the M3 set screw if needed.

Click in the Nuki Smart Lock
Snap the Nuki Smart Lock PRO into place following the standard installation procedure.

Bill of Materials (BOM)

Item

Quantity

Notes

3D printed parts

3

Base, key adapter, Ring

M4 threaded inserts (Base)

2

For mounting plate attachment

M3 threaded insert (Key)

1

For securing the key with set screw

M4 × ~10mm screws

2

To mount Nuki plate to base

M3 × ~5mm set screw

1

To secure key adapter to shaft

Read more Show less

Print spec

Formats
3mfstep
Model files
4
Total size
141.1 KB
Largest file
71.9 KB

0 comments

See all