Các chi tiết cho item Profile 5 20x20

These are some connecting parts for item profile 5 20x20. They are part of a different project, but complete in and of themselves. All parts are for the use with M4 screws. As they are printed, expect them to be a lot more fragile than their metal counterparts, so be careful with the loads you put on printed parts. For enclosures, frames and general assemblies that do not require strong connections, they are fine to use in my experience.

Currently, these are available:

• angled corner bracket

• connecting plates in I, L and T shape

• T-slot nut for M4 screws

For the T-slot nut, you will need an additional M4 nut of the type DIN 439 (ISO 4035), as regular nuts will collide with the profile they are inserted into. They are the low-profile variant of regular nuts. It is not required to glue them to the printed part.

Printing

• material: PETG, ASA or similar

• walls: 3 or more

• layer height: 0.2 mm to 0.25 mm

Updates

When I need more parts, I will add them here.