Giá Đỡ Ống Gắn Dưới Kệ (23 mm)

Under-Shelf Pipe Mount (23 mm)

This is a compact under-shelf pipe mounting bracket designed to securely hold a 23 mm diameter pipe or rail beneath a flat surface such as a desk, shelf, or cabinet.

The mount fixes to the underside of the surface using four screws and supports the pipe from below with a close-fitting circular cradle. It is suitable for applications such as wardrobe rails, cable conduits, lightweight support bars, or custom furniture projects.

Dimensions

• Pipe inner diameter: 23 mm

• Total height (base to top): 50 mm

• Mounting screw holes: 3 mm diameter (designed for standard wood screws)

Printing Notes

• Recommended orientation: print flat on the base

• Supports required

• 20–30 % infill is sufficient for most non-load-bearing uses

• PLA is adequate for indoor use; PETG recommended for higher temperatures or mild flex

Assembly

• Fix to the underside of the surface using four 3 mm screws

• Slide the pipe into the cradle once mounted

This design prioritises simplicity, clean lines, and ease of printing while maintaining adequate strength for light to moderate loads.