Nắp dùng chai PET thay cho Camelbak

I have no desire for short biketours to fill the Camelbak and then elaborately clean and dry. Therefore, I have made this closure so that you can use normal PET bottles (or for those who do not have a Camelbak). The tubes of the Camelbak should normally fit. The hoses on the pictures are made of silicone. You need a short piece of hose for the connection in the bottle.

I integrated a small hole in the lid so that air can flow in when you drink. However, my printer has closed the hole. You can also drink this way, but then you have to suck harder. I helped with a 1mm drill.

(This was a quick-shot design, so have mercy on me)

Please use only PETG to print. PLA is not food save! Print it with the flat side down.

I printed it with 3 perimeters and 0.2 layerhight. Make sure you have no underextrusion, otherwise the hose attachments will break.

Printtime was 1h 18min on a CR10s pro V2.

May the print with you 💪