
The R7Makers Ledger | Sổ theo dõi sách modular & bộ đếm cơ khí
- Downloads
- 1
- Likes
- 3
- Views
- 105
- Remixes
- 0
- Comments
- 0
Files 15 7.4 MB
- BooksCountedBookNumber4_1770092561.3mf3MF · 28.7 KB
- BooksCountedBookNumber1_1770092562.3mf3MF · 29.1 KB
- BooksCountedBookNumber5_1770092564.3mf3MF · 52.1 KB
- BooksCountedBookNumber8_1770092565.3mf3MF · 65.2 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #210204
- Category
- Giáo Dục
- Published
Description
The R7Makers Ledger | Modular Book Tracker & Mechanical Counter
The "How & Why" Behind the Design
I’ll be honest: I initially tried to print this as one solid piece, but the print time was way too long and a single failure was costing me an entire spool. I went back to the drawing board to create a modular, "smart" assembly that actually makes sense for a workshop environment.
The R7Makers Ledger is a tactile, mechanical tracking system. I designed this specific version for the "BookTok" and reading community to track yearly goals (0-999).
Maker-Centric Features:
-
Texture Optimized: This model is engineered to be printed face-down. By using a textured PEI plate, you get a professional finish that hides print lines and makes it look like a retail product.
-
Modular Reliability: By breaking the cover, pages, and spine into separate parts, you minimize risk. If one part fails, you aren't starting from scratch.
-
Zero-Hardware Hinge: No need to source tiny metal pins. The hinge is designed to use a simple strand of 1.75mm PLA or PETG filament.
Production & Assembly Tips:
-
Magnets: Designed for 9mm x 3mm circular magnets (4 total). They are a snug press-fit, but a tiny dab of superglue ensures they never budge.
- Pro-Tip: To get the polarity right, press the magnets into the "pages" first. Then, let the next two magnets snap onto those. Press the lid down onto them to ensure a perfect "click" closure.
-
The Hinge: Thread your filament through the spine. I like to take a soldering iron and lightly "mushroom" the ends of the filament for a permanent, clean finish.
-
Tight Tolerances: The pages are designed to be a very tight fit into the back cover. This ensures the book feels solid in the hand. A little pressure (and a drop of glue for longevity) goes a long way.
For the Shop Owners & Content Seekers
I’m sharing this design because I want to see more functional, high-quality prints out in the world. Whether you are running a business or just love a new project every month, the R7Makers Merchant Tier on Thangs is designed to be your partner.
Why join the Merchant Journey?
-
Monthly Chapter Drops: This Ledger is the cornerstone of Chapter 3 (Mechanical Counters). Subscribers get every variation I release (Savings Trackers, Fitness Goals, etc.) delivered automatically as part of the monthly content pass.
-
The Master Production Plate: I’ve included a "Master 3MF" specifically for subscribers. It pre-arranges the 30 number tiles and the spine for a one-click, efficient print session—saving you time and setup.
-
Full Commercial License: Gain the legal right to sell physical prints of the Ledger and all other R7Makers designs while subscribed.
-
50% Storewide Discount: Need a specific file from the archives? Active subscribers get half-off every individual item in the shop.
I’m here to help you grow your collection or your business. If you have questions about printer settings or assembly, reach out.
👉 Join the R7Makers Merchant Tier on Thangs
Technical Specs:
-
Print Orientation: Face-down for all covers and tiles.
-
Supports: None required.
-
Hardware: 4x (9mm x 3mm) Magnets + 1.75mm Filament strand.
-
Material: Works great in PLA, PETG, or even Wood-fill for a "classic book" feel.
Print spec
- Formats
- 3mfstl
- Model files
- 15
- Total size
- 7.4 MB
- Largest file
- 2.6 MB












