Spig Wing Jig - Flinging Arrows Mod V0.2

Thanks to Ludodg for the initial design. 

V0.2  1/27/2026

Initial public beta release.
Jig has been tested for printability.
Successfully used to fletch 1 dozen of the following arrows with spider vanes
Easton x10
Pandarus CA320 Elite
Avalon Classics 4.2mm
Victory Vaps

Known Issues
*Nock holder hexagon fits with tuned printers. For printers with looser tolerances scale the nock holder by 1%.

• TODO

  • BOM - Links, printed parts.

  • Print Settings

  • Assembly Instructions

  • Longer Holder for Indoor Vanes

  • Jet6 clamps

  • Cleanup Fusion 360 File

  • Options for Printed Beams

  • Description

BOM

• 5x M5x10 BHCS

• 2x M5 Roll In T Nut

• 2x M5x12 Thumbscrews

• 1x 2020 V-Slot 300mm (Centers tapped for M5)

• 1x 2020 V-Slot 100mm (Centers tapped for M5)

• 1x 10mm elastic band 700mm long (~28 inches)

• 1x Cord lock for elastic band (Can also just tie a knot) 

Print Settings

PLA/PETG can be printed without changes needed 

ABS parts are not scaled to account for shrinkage. You will need to scale them up. Recommended (100.45)

Used standard Voron settings for test parts https://docs.vorondesign.com/sourcing.html#print-settings