Chân Tripod / Monopod (ren 3/8"-16)

This foot will replace a foot on many standard tripods/monopods with a 3/8" x 16 thread per inch socket. This connection is standard on many pods - check yours to confirm a match.  I used a hex-head 3/8" 16 thread per inch bolt 3/4" long in stainless steel.  I printed the foot flat side down with supports from the building plate.  The material was Siraya 85A black TPU - I believe most TPU filaments should work well.  I suggest 40% infill and 4 perimeters.  TPU sticks tightly to PEI plates so make sure to use a glue stick or other release agent.  Epoxy the bolt into the foot. A Fusion 3D file is included if you want to modify this design.