Skip to main content
F3D
Miếng Chụp Bảo Vệ & Cân Bằng Chân Bàn Ghế Parametric 1

2 images

Đồ Gia Dụng

Miếng Chụp Bảo Vệ & Cân Bằng Chân Bàn Ghế Parametric

By Testzugang_7097

Downloads
2
Likes
2
Views
75

Files 9 76.4 KB

  • foot_protector_20x20mm_1769817450.stlSTL · 15.3 KB
  • foot_protector_40x40mm_1769817451.stlSTL · 15.3 KB
  • foot_protector_30x30mm_1769817451.stlSTL · 15.3 KB
  • foot_protector_19x52mm_1769817452.stlSTL · 6.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Parametric Furniture Leg Protector & Leveler

Protect your floors and level your furniture! This fully parametric OpenSCAD model creates custom-fit protective caps for wooden table and chair legs.

No more scratched floors or wobbly furniture! Adjust the bottom height to compensate for uneven legs and eliminate wobbling forever. Simply measure your leg dimensions, adjust the parameters, and print a perfect fit.

🚀 Key Features

  • 100% Parametric: Adjust all dimensions to fit any rectangular or square table leg.

  • Protective Bottom: Solid base prevents floor scratches and protects the wood from moisture.

  • Level Wobbly Furniture: Adjust the bottom height to compensate for uneven leg lengths - no more wobbling tables!

  • Snug Fit: Hollow rim grips securely around the leg.

  • Chamfered Edges: Smooth, rounded edges make installation easy and look professional.

  • Print-Friendly: Designed to print without supports, standing upright.

🛠 How to Customize

1. Download the .scad files (both foot_protector.scad and foot_protector_config.scad).

2. Install the [BOSL2 library](https://github.com/BelfrySCAD/BOSL2) via OpenSCAD's library manager.

3. Open foot_protector_config.scad in [OpenSCAD](https://openscad.org/).

4. Use the Customizer panel (Window → Customizer) to set your dimensions:

  • bottom_width: Inner width of your table leg (X-axis).

  • bottom_depth: Inner depth of your table leg (Y-axis).

  • bottom_height: How thick the protective base should be (default: 3mm). Increase for shorter legs to level furniture.

  • rim_height: How far up the leg the protector extends (default: 10mm).

  • rim_wall_thickness: Thickness of the walls (default: 4mm).

  • chamfer_size: Size of rounded edges (default: 0.4mm).

5. Render (**F6**) and Export as STL (**F7**).

🖨 Printing Tips

  • Orientation: Print standing upright (bottom on the build plate).

  • Supports: None required.

  • Material: PLA works great for indoor furniture. PETG or even ABS recommended for outdoor or heavy-duty use. 

  • Layer Height: 0.2mm works well. 0.15mm for smoother finish.

  • Infill: 15-20% is sufficient. The solid base provides strength.

  • Walls: 3-4 perimeters for good strength.

📦 Files Included

  • foot_protector.scad: Main source file.

  • foot_protector_config.scad: Configuration file (customize here!).

  • Example STLs (in export/ folder):

    • foot_protector_19x52mm.stl: Small narrow rectangular leg.

    • foot_protector_20x20mm.stl: Small square leg (chair leg).

    • foot_protector_30x30mm.stl: Medium square leg.

    • foot_protector_40x40mm.stl: Large square leg (heavy-duty table).

    • foot_protector_44x26mm.stl: Medium rectangular leg.

    • foot_protector_50x58mm.stl: Large nearly square leg (table leg).

    • foot_protector_59x39mm.stl: Large rectangular leg.

If you find this useful, please post a make! I'd love to see what furniture you're protecting.

💡 Tips

  • Measure your leg dimensions carefully. Add 0.5-1mm to the width/depth for a slightly looser fit if your printer tends to print tight.

  • For very large legs, increase the rim_wall_thickness to 5-6mm for extra strength.

  • Print a test piece first with just 2-3mm of rim_height to verify the fit before printing the full height.

  • Leveling wobbly furniture: Measure the gap between the short leg(s) and the floor, then print protectors with different bottom_height values for each leg. This eliminates wobbling without shimming!

Read more Show less

Print spec

Formats
scadstl
Model files
9
Total size
76.4 KB
Largest file
15.3 KB

0 comments

See all