Skip to main content
F3D
Hộp đựng tay cầm Xbox dạng module để mang đi… 1

7 images

Dụng Cụ Tiện Ích

Hộp đựng tay cầm Xbox dạng module để mang đi (Modular Xbox Controller Travel Case)

By Davlumbaz_3193269

Downloads
40
Likes
18
Views
303
Remixes
1

Files 7 1.6 MB

  • Base_-_Interior_1769816401.stlSTL · 347.6 KB
  • Base_-_Shell_-_Tight_Fit_1769816403.stlSTL · 240.9 KB
  • Base_-_Shell_-_Loose_Fit_1769816404.stlSTL · 240.9 KB
  • Lid_-_Interior_1769816405.stlSTL · 304.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

This is a remix of the Xbox controller travel case where I split the interior from the exterior, allowing me to print the inside with TPU which is softer while printing the exterior shell with rigid PLA. This also lets you print the inside and outside with different colors easily.

You need 6x M3x30 screws as with the original design.

What parts to print?

1. The interior parts.

  • “Base - Interior.stl”

  • “Lid - Interior.stl”

2. The outer shell. If you've printed the interior parts with a material that expands a lot you may want to prefer the “Loose Fit” variant of the shell parts. Since I used soft TPU for I went with the “Tight Fit” variant for the outer shell. Feel free to experiment and even apply custom scaling for what works best for you.

  • “Base - Shell - Loose Fit.stl” OR "Base - Shell - Tight Fit.stl"

  • "Lid - Shell - Loose Fit.stl" OR “Lid - Shell - Tight Fit.stl”

3. Latch: Print two of these

  • "Latch.stl"

Read more Show less

Print spec

Formats
stl
Model files
7
Total size
1.6 MB
Largest file
347.6 KB

0 comments

See all