Pixel Heart Fidget

PLA basic filament preferred

Layer Height 0.2mm

Infill 10-15%

No supports needed

Basic PLA is the best for this print. Like my other recent pixel style fidgets,  I don’t recommend PLA Silk or PLA Matte filaments for this print. It is very detailed (on the inside) and the tolerances are small.  I printed several of these in these three types of filaments and Basic PLA always printed the best and had smoother “movement” when done.

Also, if you have any difficulty printing this I recommend slowing the print down.  The design is intricate and detailed on the inside and slowing down the print will ensure better print quality if it is not printing well at 100% speed.