
Bộ đếm Split-flap – In hoàn toàn, lắp ráp dễ
- Downloads
- 1,524
- Likes
- 674
- Views
- 14,072
- Remixes
- 1
- Comments
- 0
Files 11 1.2 MB
- flaps-drum-left_1769643757.stlSTL · 179.7 KB
- flaps-drum-right_1769643758.stlSTL · 171.6 KB
- flaps_1769643759.stlSTL · 533.8 KB
- frameV3_1769643760.stlSTL · 43.9 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #205836
- Category
- DIY
- Published
Description
A fully printable and easy to assemble split-flap counter.

Print instructions
No support is required.
I printed the parts with 2 perimeters, 10% rectilinear infill and 0.2mm layer height.
I recommend splitting the flaps.stl in PrusaSlicer to fit smaller build plates.
Right-click the object -> Split -> To Objects.
Add a color change for the first and last layer when printing the flaps.
Changelog
2021-08-29:
Updated the frame (v3). I noticed that the frame was prone to tip forward so I shifted the bottom a bit. This version can also be printed mirrored and connected to each other.
2021-06-22:
Updated the frame (v2) to include a stopper which prevents the bottom flaps to swing. I've added a small adpater for those who already printed v1.
Designing your own flaps
These are the measurements for the flaps. The numbers are cut 0.2mm into the flap.

Like my models? Consider buying me a coffee:
https://www.paypal.me/thhen
Print spec
- Formats
- stl
- Model files
- 11
- Total size
- 1.2 MB
- Largest file
- 533.8 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-
New -

-

-

-

-
New -



