Camera Enclosure Unofficial cho Prusa XL

Items needed:
1 x Raspberry Pi Zero W
1 x Raspberry Pi Camera module 3 Wide
1 x Raspberry pi Camera Cable (300mm)
1 x Filament of choice
4 x M2 screw (15mm)
4 x M3 screw (10mm)
5 x m4 screw (16mm)
1 x MicroUSB Cable (Length is up to you)
8 x ziptie (2.5 x 160 mm)

Link for software install instructions: https://gist.github.com/cannikin/4954d050b72ff61ef0719c42922464e5

How to put Camera Together: 

How to install Camera to enclosure:

Note:

screw length is just is a suggestion, you can get away with longer ones to an extent as the holes a pass-through