
Xe nâng cân pallet sticky note Uline
- Downloads
- 21
- Likes
- 8
- Views
- 164
- Remixes
- 0
- Comments
- 0
Files 24 1.7 MB
- Forklift_Assembly_BodyFixed_1769562199.fcstdFCSTD · 286.4 KB
- Forklift_Axel_10-32x1inch_1769562200.fcstdFCSTD · 19.9 KB
- Forklift_Axel_Washer_No10_1769562201.fcstdFCSTD · 8 KB
- Forklift_Body_1769562202.fcstdFCSTD · 425.7 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #204601
- Category
- Đồ Gia Dụng
- Published
- License
- Creative Commons — Attribution
Description
This forklift is scaled so that it can hold sticky note pallets from Uline. Not modeled after any particular forklift but a combination of pictures found online and the forklift at work.
Print 2x of the following files:
-
Forklift_Cabin_Side.stl
-
Forklift_Front_Wheel.stl
-
Forklift_Rear_Wheel.stl
-
Forklift_Fork.stl
The following files will need to be printed with supports enabled:
-
Forklift_Body.stl
-
Forklift_Load_Backrest.stl
-
Forklift_Cabin_Top.stl
For counterweight I used two lengths of 7/8" brass round stock about 2" long. Any heavy object should work such as steel.
For wheel axles you will need 4x 10-24 1.5" bolts. It should be an interference fit in the body so either use the bolt to form the threads or use a tap. If you can only get metric bolts a M5 may work but I have not tried it.
I have added a pallet if you want to print one or your sticky notes did not come on a pallet. I have not printed it so I am not sure how well it will turn out.
FreeCAD design files are included if you need to modify anything. Be sure to share your modifications with everyone on Printables!
I had originally uploaded this to Thingiverse as thing:3165641 and never got around to importing it here to Printables.
Print spec
- Formats
- fcstdstl
- Model files
- 24
- Total size
- 1.7 MB
- Largest file
- 425.7 KB
0 comments
You may also like 12 models
See all-

-
New -

-
New -

-
New -

-

-

-
New -

-


