
Móc cho bánh xe kayak dùng dây đai 1"
- Downloads
- 1
- Likes
- 0
- Views
- 41
- Remixes
- 0
- Comments
- 0
Files 3 386.1 KB
- StrapHook-strapHook_1769552088.stepSTEP · 155.2 KB
- StrapHook-strapHook_1769552089.stlSTL · 139.5 KB
- StrapHook_1769552089.3mf3MF · 91.4 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #203630
- Category
- Thể Thao & Ngoài Trời
- Published
- License
- GNU General Public License v3.0
Description
I bought some cheap kayak wheels from aliexpress. They came with one strap that you somehow had to use to secure the wheels under your kayak. I dedicated two 1" straps to the wheels. Now I can just hook the straps to the wheel frame. The strap length needed stays about the same, so Hook, Tighten and Go. Much better.
I printed them with 5 vertical and horizontal layers for strength. I used a 0.6mm nozzle and a 0.4mm layer height. So far so good.
Maybe these hooks can be used for other purposes. They fit a 0.75" tube and an 1" strap. Strangely, the Chinese wheels use Imperial tubes.
Print spec
- Formats
- 3mfstepstl
- Model files
- 3
- Total size
- 386.1 KB
- Largest file
- 155.2 KB











