Rook 2020 hỗ trợ giường đơn

I exported the 3-piece bed support into one piece. I left the M3 Nut locations and M3 Holes so you can still add them for more strength.

I also adjusted the bearing holes to be a solid hole instead of a tighten down option like other bed supports are. Bearings should be a press fit if printed properly. If printing in ABS scale to adjust for shrinkage. Usually 100.4% to 100.5% depending on your filament brand.

I printed 4 Walls, 5 Top/Bottom and 25% Cubic.