Xe đạp - Cáp phanh sang Cáp Cáp - Mục nhập phụ

By bjamdesign

Downloads: 0
Likes: 0
Views: 0
Remixes: 0
Comments: 0

Download all (.zip)· 4 files · 3.1 MB· 3.1 MB

Files 4 3.1 MB

cableclip_side_easy_brim_0.4n_0.2mm_PETG_MINI_27m_1766422277.gcodeGCODE · 1.7 MB
cableclip_side_easy_brim_1766422274.stlSTL · 253.9 KB
cableclip_side_1766422275.stlSTL · 994 KB
CableClip_-_Side_Entry_Parameterized_1766422276.f3dF3D · 124.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #20194
Category: Thể Thao & Ngoài Trời
Published: 03/15/2025
License: Creative Commons — Public Domain
Tags: bike
cableclip

Description

A clip to hold 5mm brake housing and 4mm shift housing together on your bike to keep things nice and tidy and rattle-free

If cables tend to pull away from each other, a design like this flat front may help keep them together.

Other filaments may work. I have tried 95A TPU and there was not enough rigidity with this design to reliably hold the cables. You could make the design thicker and may get TPU to work better than I did. I have not tested PLA, I would likely avoid standard PLA to avoid cracking. A PLA+ type material may be a good option.

Print Settings

Material: PETG
Infill: 100% infill (or enough perimeters to be solid)
Supports: None
Orientation: vertical (see gcode for example)

Updates

2023-09-05
- add fusion file (reworked to be properly constrained)
  - separate parameters for both cable diameters, cable tolerance, and degrees of wrap around the cables
- add minimal modeled brim for easier printing, makes additional slicer brim easier to remove as well
- oriented old file to import ready to print
- add a gcode file