
Giá gắn umbilical Orbiter v2 EBB36 góc 45 độ
- Downloads
- 0
- Likes
- 1
- Views
- 74
- Remixes
- 0
- Comments
- 0
Files 2 1.7 MB
- orbiter-v2-ebb36-gen2-45degree-umbilical_1768163108.stepSTEP · 401.7 KB
- ebb36-45-degree-umbilical_1768163109.stlSTL · 1.3 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #200572
- Category
- Máy In 3D
- Published
Description
After converting my Switchwire (VS.643) to Dragonburner, I was disappointed to lose quite a lot of vertical build volume. This was due to an umbilical adapter for the EBB36 Gen 2 that mounts the CAN cable at a 90 degree (vertical) angle. This also puts added strain on the cable and requires a larger umbilical loop. It seemed to me that mounting the cable at 45 degrees, angled toward the base end, would require less cable, less vertical space, adn reduce strain.
I printed mine in PETG with 15% infill.
Install M3 x 0.5 x 4.0 brass inserts into the larger mount holes for the EBB36. Attach the part to the standoffs on the Ortbiter v2 extruder using M3 screws. Attach the EBB36 to the part. I installed mine without removing any connections to the board (but with the toolhead out of the printer).
Use a couple zip ties to secure the CAN connector.
Print spec
- Formats
- stepstl
- Model files
- 2
- Total size
- 1.7 MB
- Largest file
- 1.3 MB
0 comments
You may also like 12 models
See all-

-

-

-
New -
New -
New -

-

-

-

-

-


