Giá đỡ Dosing Cup cho Eureka Mignon (58/56/54/51mm)

Remixed to make useful with a Eureka Mignon on a tilted base. It may also be useful for people who want the holder to retain the dosing cup more securely without a tilted base.

Have also included a version for different size dosing cup (51mm, 54mm, 56mm, 58.5mm).

I've also included a coffee ground catching base and also a tilted stand. I would highly recommend these.

Which Model is for me?

For my machine I choose the one with the v2 knob to activate grinding and 120 degree tilt to retain the catch cup.

You can use a stick on rubber piece at the rear of the print without a knob to activate the grinding. Alternatively there is a version with a printed knob. 

I initially modified the design to 115 degrees, but have since modified it to 120 degrees as this works better with a Eureka Mignon that is tilted. 

Install

The metal fork holder piece from the machine is removed and this plastic piece replaces it. You will need to install the holder while the Eureka part is inserted into the machine. Use the same screw from the original part.

Simply push the holder up/in to activate (the printed knob has been updated to improve this action). The action will be different depending on how you have inserted the original Eureka Mignon piece. 

Printing

Print with the top on the build plate. No supports were required on my printer. Some people might appreciate a little more angle or a little bit bigger cup (one version is 115 degrees, the other version is 120 degrees). 

I printed in ABS, but other materials should work fine.

If it isn't quite perfect, you can download Fusion 360 free version and adjust the model as needed with attached file.