
Giá đỡ Raspberry Pi 4B cho Prusa MK3/S (Octopi/Octoprint)
- Downloads
- 1,346
- Likes
- 350
- Views
- 12,522
- Remixes
- 0
- Comments
- 0
Files 2 490.2 KB
- bottom_1768162227.stlSTL · 248.3 KB
- bottom-lowered_1768162229.stlSTL · 241.9 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #200122
- Category
- Máy In 3D
- Published
Description
This item is a replacement for the bottom of a Geekworm Heavy Duty Aluminum case for RPi4 which mounts to the back on a Prusa MK3/S frame above the electronic box.
The Geekworm Case (Amazon US) is a generic, inexpensive aluminum case for the RPi4, meant for passive cooling, with the top of the case contacting 4 chips on the RPi4 board and serving as a big heatsink.
This project replaces the bottom of the case with a near-identical design, adding a mount for the MK3/S frame, combining the thermal performance of the passive cooling aluminum top with the matching integrated mount at the bottom.
Two screws are required to mount the case to the frame:
-
Original version: The total thread depth with frame is 13.2mm, so a M3x12 is best. M3x10 will work in a pinch and M3x14 will stick out a bit but will clear all moving parts.
-
Lowered version: The total thread depth with frame is 9.2mm, so a M3x8 is best. M3x6 will work in a pinch and M3x10 will stick out a bit but will clear all moving parts.
April 2021 Update: Added a version sitting lower on the frame to clear the excellent LED Light Bar Prusa i3 MK2/MK3. The mount uses different screw holes and looks a bit different. The rest is identical.
Print instructions
The bottom get can get a bit hot so I recommend printing it in PETG or higher temperature material.
The bottom is designed to print without support at 0.2mm layer height. It should work with other settings.
Print spec
- Formats
- stl
- Model files
- 2
- Total size
- 490.2 KB
- Largest file
- 248.3 KB
0 comments
You may also like 12 models
See all-

-
New -

-

-

-
New -

-

-

-

-

-


