
Bộ nam châm Riftbound - Dispenser Might Token dùng lò xo
Remix of Bộ Nam Châm "Riftbound Magnet Kit" By Formyx3D_1825765
- Downloads
- 1
- Likes
- 2
- Views
- 130
- Remixes
- 0
- Comments
- 0
Files 4 4.3 MB
- Body_1767922173.stlSTL · 2.1 MB
- Top_1767922174.stlSTL · 302.2 KB
- Stopper_1767922175.stlSTL · 131.8 KB
- TokenBox_1767922176.fcstdFCSTD · 1.8 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #198133
- Category
- Board Game
- Published
Description
Might Tokens not included (see post of the original creator)
While trying to practice with the FreeCad application, I designed this spring-loaded token dispenser for the Might tokens of the Riftbound Magnet kit. Is it over-engineered? Probably, but at least it looks cool on the table. I also included the FreeCAD file.
Features:
Compatible with 7.0mm x 19.0mm and 9.5mm x 19.0mm springs (the 9.5 provides more stability)
I used a cheap set of springs like this amazon set: https://www.amazon.de/-/en/dp/B07WFPPXXX
8 Slots total, that can each hold 5-6 tokens (6 tokens nearly compress my spring fully, so I recommend max 5 tokens)
Held together with 5 M3 screws, with max screw length of 12mm.
- For this model I used M3x10mm screws
Works perfectly with FDM printers (PLA or PETG recommended)
Print settings:
Layer height: 0.2 mm
Infill: 15-25%
For the top part I use 5 walls (to battle the pressure from the springs trying to bend the top)
Supports: For the top model I used supports under the screw counterbore cutouts.
Nozzle temp: 200–220°C
Bed temp: 60 °C
This model is fan-made and not affiliated with the official Riftbound creators.
Print spec
- Formats
- fcstdstl
- Model files
- 4
- Total size
- 4.3 MB
- Largest file
- 2.1 MB












