Skip to main content
F3D
[IL.00] Heatbed K1 Max cho buildplate Voron 310×310 1

1 image

Máy In 3D

[IL.00] Heatbed K1 Max cho buildplate Voron 310×310

By _2389838

Downloads
1
Likes
1
Views
70

Files 5 249.8 KB

  • Left_Buildplate_Guide_1767906563.stlSTL · 78.5 KB
  • Right_Buildplate_Guide_1767906564.stlSTL · 77.8 KB
  • Magnet_Sheet_Guide_Jig_1767906565.stlSTL · 54.2 KB
  • Jig_Linker_Pin_1767906566.stlSTL · 8.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#197873
Category
Máy In 3D
Published

Description

The Voronic K1 | IL.00 Lineup

  • It took a year to present this just for you.

  • If you haven't, you probably want to see my bed frame to take even more effect with the bed.

    • It will take 1.2 kg off the Z assembly.
  • Thanks a lot for the original creator: If you didn't, nor would this!

  • There are sketch files, so feel free to use them to make one yourself.

  • I feared that I couldn't repair it after the plates were discontinued.

    • Due to their own type of screw mounting, I made it universally compatible with ANY 310*310 plate, completely eliminating my fear.
  • They're now friends!

    • 2.4 (300 mm)

    • Trident (300 mm)

    • Any printer with a 310*310 bed and/or buildplate installed.

  • It is 6 mm thick.

    • It's way harder to warp.

    • Stock bed is 3 mm thick, which you probably wouldn't wanna go back to.

CRUCIAL:

  • The stock 310*315 accessories will no longer fit.

  • You'd probably want to switch to a Voron PEI plate.

  • PLEASE DO NOT BUY 305 PLATES. IT STRICTLY HAS TO BE 310.

    • Due to Voron having so many different sizes of heatbeds, many get confused.

    • Be sure that you are buying a 310*310 BEFORE you do it.

Changelogs:

  • [Done 12/31/2025] Initial release.

  • [Done 1/1/2026] Happy new year!

Scrapped:

What to have before starting:

  1. 4x Sheet Jigs

  2. 8x Jig Pins (They'll be superglued later)

  3. 1x Voronic 310 Bed

    1. This STRICTLY has to be made out of Aluminum 6061.
  4. 1x Heater Sheet (Stock K1 Max type. I designed the bed for this.)

    1. DO NOT RECYCLE SILICONE HEATERS.
  5. 1x 310*310 Magnetic Sheet (Necessary for PEI sheets!)

  6. 1x Left and Right Plate Guide (Print one for each guide.)

Caution:

  • The plate guides have to be printed with at least polycarbonate. If not, they'll melt off due to the bed temperature. I recommend PC-PBT-CF, but often PC is enough.

    • You may also choose to use the PPS-CF, but be careful to check if you're really capable of printing it.

    • ABS is often NOT enough to hold itself at 110 °C.

    • ASA's warping is NOT good when it comes to a print this large.

  • They'll fit in your K1 Max when you arrange the parts like this:

  • The guides are based on your K1 Max.

    • It'll be worse when your buildplate is smaller than the 300*300. 
  • You WILL use the jig more than once.

    • Any filament is usable, but be sure you're using only one filament for the entire jig.

Read more Show less

Print spec

Formats
stepstl
Model files
5
Total size
249.8 KB
Largest file
78.5 KB

0 comments

See all