Skip to main content
F3D
Nắp chụp tâm mâm Classic Mini 13" 55mm 1

6 images

DIY

Nắp chụp tâm mâm Classic Mini 13" 55mm

By Apfelsaftbaum_960937

Downloads
1
Likes
1
Views
56

Files 10 6.5 MB

  • Mini_Wheel_center_cap_v18_black_1767910423.stlSTL · 82.3 KB
  • Mini_Wheel_center_cap_v18_silver_1767910424.stlSTL · 413.9 KB
  • Mini_Wheel_center_cap_v18_red_1767910424.stlSTL · 72.7 KB
  • Mini_Wheel_center_cap_v18_ring_1767910425.stlSTL · 530.9 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#197664
Category
DIY
Published

Description

Printable wheel center caps for 13" wheels on a classic Mini.

Made to fit my 13" Revo RFX alloy wheels with a 55mm hole diameter.

The original caps clip in. I tried to recreate that, but the clips kept breaking. This version gets fixed with an additional ring inside the wheel behind the small lip the clip normally grabs. The two pieces get screwed together with 4 M3x10 screws in melt in inserts. This means you need to remove the wheel to fit the caps.

There are multiple versions: A multicolor version for multicolor printing (Anycubic ACE Pro in my case), which is shown in the pictures. I sanded the face of the caps flat and painted them with multiple layers of clear coat to get the shiny finish.

Additionally, there is a single color version with the text recessed. You can fill this recess with paint to create the lettering. A third version is without text; in case you want to create your own designs.

Print in PETG or similar with high wall count and infill. 

You will need for each cap:

  • 4x M3x10 Screw

  • 4x M3 Washer

  • 4x M3 Brass Heatset insert (Melt in thread) with max. 5mm lenght

  You should use locktite on the screws to prevent them coming loose, do not overtighten the screws!

Feel free to remix!

Read more Show less

Print spec

Formats
f3dstepstl
Model files
10
Total size
6.5 MB
Largest file
3.5 MB

0 comments

See all