Ken “Okarun” Takakura (DanDaDan) – HueForge

By AshleyMay_2698068

Downloads: 0
Likes: 0
Views: 78
Remixes: 0
Comments: 0

Download all (.zip)· 2 files · 64.2 MB· 64.2 MB

Files 2 64.2 MB

Okarun_1767913809.3mf3MF · 10 MB
Okarun_Front_200x113_1767913811.stlSTL · 54.1 MB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #197400
Category: Mỹ Thuật
Published: 01/09/2026
License: Creative Commons — Attribution — Noncommercial
Tags: hueforge
anime
animecharacter
animeart
dandadan
okarun

Show more tags Show fewer tags

Description

Project: Okarun.hfp

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x112.5mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.2mm

    #000005 PLA Elegoo Matte Black Transmission Distance: 0.2
    #5f6575 PLA Esun Grey Transmission Distance: 1.2
    #0078bf PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
    #00f52c PLA Sunlu Green Transmission Distance: 6
    #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
    #9d432c PLA BambuLab Basic Brown Transmission Distance: 2
    #d3b7a7 PLA BambuLab Matte Latte Brown Transmission Distance: 2
    #e8dbb7 PLA BambuLab Matte Desert Tan Transmission Distance: 1
    #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 9 unique filaments

Swap Instructions:
    Start with Black
    At layer #12 (0.6mm) swap to Grey
    At layer #15 (0.72mm) swap to Marine Blue
    At layer #19 (0.88mm) swap to Green
    At layer #23 (1.04mm) swap to Yellow
    At layer #27 (1.2mm) swap to Brown
    At layer #34 (1.48mm) swap to Latte Brown
    At layer #41 (1.76mm) swap to Desert Tan
    At layer #44 (1.88mm) swap to Jade White for the rest.