Momo Ayase từ DanDaDan (Hueforge)

Project: Momo.hfp

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x112.5mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.12mm

    #000000 PLA Geeetech Black  Transmission Distance: 0.1
    #57361c PLA Overture Chocolate  Transmission Distance: 0.2
    #ff0000 PLA Anycubic Bright Red  Transmission Distance: 5
    #cd007b PLA BambuLab Basic Magenta  Transmission Distance: 3
    #e4bdd0 PLA BambuLab Matte Sakura Pink  Transmission Distance: 3
    #d3b7a7 PLA BambuLab Matte Latte Brown  Transmission Distance: 2
    #00f52c PLA+ Sunlu Green  Transmission Distance: 10
    #00b1b7 PLA BambuLab Basic Turquoise  Transmission Distance: 1.4
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 9 unique filaments

Swap Instructions:
    Start with Black
    At layer #14 (0.68mm) swap to Chocolate
    At layer #16 (0.76mm) swap to Bright Red
    At layer #21 (0.96mm) swap to Magenta
    At layer #26 (1.16mm) swap to Sakura Pink
    At layer #29 (1.28mm) swap to Latte Brown
    At layer #36 (1.56mm) swap to Green
    At layer #37 (1.6mm) swap to Turquoise
    At layer #40 (1.72mm) swap to Jade White for the rest.