Echo Dot Lock – Giá treo/ốp khóa chắc chắn cho Echo Dot Gen 3

More of a re-make than a re-mix, made by me from scratch, but the skeleton was inspired by @Stevetecx's design on thingiverse. Reposting my own model here, as I start to flesh out my printables profile with other things I've made. not sure if I was supposed to select repost, remix, or original...

Built from the ground, up, to be robust and secure against repeated removal and installation, or children thinking they can take the alexa out of the dining room to listen to crummy music in their rooms :) Probably won't break if printed well, but might scratch up that fancy fabric speaker grill around the outside. Maybe smooth the corners of the arms out a little before you jam it in (it gets harder to put in the bracket when it's screwed to the wall)

Version 1b v5, (because I can't commit to a version numbering scheme.)
-Reinforcement ribs to help keep arms from snapping off.
-Lock ring for peace of mind if you're hanging it under a shelf, on the ceiling, in a moving vehicle, or next to mech-jeb on your latest rocket.
-Consistant thickness of ring to avoid inner-wall islands and excessive start-stops.
-Ring is also Ribbed for stiffness, but will flex when installed, feel free to scale up a smidge for aesthetics if security isn't top priority

I printed mine with PETG, 3 walls, 1.2mm-1.5 thick top and bottom, and medium infill. Beefy.

Please give feedback! Too tight? Too stiff? Ugly as sin? I've heard it all... ehem...