
Vỏ (Housing) cho Module Sạc Nhanh PD65W
- Downloads
- 6
- Likes
- 1
- Views
- 118
- Remixes
- 0
- Comments
- 0
Files 4 434.7 KB
- USB-c-charger-v4-usb-c-charger-housing-_1767640826.stlSTL · 113.9 KB
- USB-c-charger-v4-usb-c-charger-lid_1767640827.stlSTL · 2.2 KB
- USB-c_charger_1767640827.f3dF3D · 189.6 KB
- USB-c_charger_1767640828.stepSTEP · 128.9 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #192540
- Category
- DIY
- Published
Description
This model is a housing for a PD65W Fast Charging Module that has a type-C USB interface that supports PD3.1 QC3.0 SCP PPS Fast Charger 5V 9V 12V 20V and DC input voltages from 8 to 32v.
The circuit module is like these: https://www.amazon.com/dp/B0DGLMWV5J
The model consists of a body and slide lid. I used 3M VHB tape to anchor the module in the housing, and soldered wire, for an Anderson Powerpole pair, to the module before inserting it in the housing.
Fusion 360 source and .STEP files are included as well as the .STL files.
Print spec
- Formats
- f3dstepstl
- Model files
- 4
- Total size
- 434.7 KB
- Largest file
- 189.6 KB












