
Gá/Kẹp Hàng Cốp Xe Dán Velcro (Velcro Trunk Cargo Bracket)
- Downloads
- 24
- Likes
- 13
- Views
- 181
- Remixes
- 0
- Comments
- 0
Files 3 1.7 MB
- velcro_trunk_cargo_bracket_1767558762.3mf3MF · 398.5 KB
- velcro_trunk_cargo_bracket_prepared_1767558763.3mf3MF · 482.5 KB
- velcro_trunk_cargo_bracket_1767558764.fcstdFCSTD · 833.9 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #191214
- Category
- DIY
- Published
Description
This cargo bracket is designed with very tight tolerances. The hinge features a 5 mm knuckle and a 4.8 mm pin and is completely print-in-place. After printing, the hinge needs to be broken free.
On the bottom, there is a 100 × 30 mm recess for attaching Velcro tape.
The current versions of Orca Slicer, Bambu Studio, and Creality Print appear to move the two objects closer together during slicing. The prepared version is intended to compensate for this behavior. Be sure to check the hinge tolerance in your slicer’s preview before printing.
For aesthetic reasons, I added modifiers with a very slight fuzzy skin on the contact sides.
Files:
velcro_trunk_cargo_bracket.FCStd → FreeCAD project file
velcro_trunk_cargo_bracket.3mf → Standard .3mf export
velcro_trunk_cargo_bracket_prepared.3mf → Prepared Orca Slicer project (should also work in most other slicers, such as Bambu Studio and CrealityPrint)
Print spec
- Formats
- 3mffcstd
- Model files
- 3
- Total size
- 1.7 MB
- Largest file
- 833.9 KB
0 comments
You may also like 12 models
See all-

-
New -

-

-

-

-

-

-
New -

-

-


