Skip to main content
F3D
Ốp lưng Samsung Galaxy Z Fold 7 - tương thích MagSafe 1

5 images

Dụng Cụ Tiện Ích

Ốp lưng Samsung Galaxy Z Fold 7 - tương thích MagSafe

Remix of Ốp Lưng Mỏng Samsung Galaxy Z Fold 7 Có Gờ Camera By allisonf_2051876

By armanatz_556229

Downloads
105
Likes
11
Views
774

Files 14 5.2 MB

  • ZF7-Camera-Ring-Generic-Magnet_1767405066.stepSTEP · 86.4 KB
  • ZF7-Camera-Ring-Generic-Magnet_1767405066.stlSTL · 592.8 KB
  • ZF7-Case-Mag-Cover-Generic-Magnet_1767405067.stepSTEP · 13.5 KB
  • ZF7-Case-Mag-Cover-Generic-Magnet_1767405068.stlSTL · 84.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Samsung Galaxy Z Fold 7 Case - MagSafe compatible

A Galaxy Z Fold 7 case that doesn't interfere with MagSafe accessories like wallets and power banks.

There are two versions to choose from if you decide to print this: using a Ringke Magnetic Plate or using a generic MagSafe magnet like this one or this one.

I have organized the files according to the version. The front cover is version agnostic.

The magnet cover is used to cover up whichever magnet you decide to get so that it doesn't end up scratching or damaging the back of your phone and sits flush. It also helps to reduce the attraction of the magnet inside the phone to the magnet in the cover. You may choose to glue things together or leave them free. I did not glue mine.

Changelog

17 Oct 2025

  • Made the back piece more compatible with USB-C cables
  • Re-aligned some cutouts to match up more with the phone
  • Rounded the bottom of the power and volume button cutout to feel nicer

Instructions

!! Word of Advice !!

Definitely need a very well-tuned printer for this. There are unsupported 90 degree overhangs all over and tolerances are quite tight. If you haven't calibrated your printer's dimensional accuracy, consider using something like the Califlower or the Calibration Bro to do that.

Cooling is also very important as there are some thin lines that need to be rapidly cooled so that they don't droop, sag, or curl up when being laid down.

Print Settings

These are the print settings I used with great success on my Voron Trident using a 0.5mm nozzle and with some generic Black Galaxy PLA.

For all models:

  • Layer height: 0.12mm
  • Seam position: Back
  • Wall printing order: Inner/Outer
  • Number of walls: 4
  • Overhang speed @ 100%: 10mm/s
  • Bridge speed: 25 mm/s external and 70 mm/s internal

For the back cover, camera ring, and magnetic cover:

  • Infill density: 30%
  • Infill pattern: Gyroid

For the front cover:

  • Infill density: 100%
  • Infill pattern: Rectilinear
  • For the front cover, I highly suggest using a smooth PEI sheet as your fingers will be interacting with it quite a bit so you don't want it to feel rough to the touch.
  • Speed should be slow for all layers. I did 50mm/s on everything as the front cover is very finicky to print fast. You are welcomed to try :D

---

Background Story (if you care)

After seeing both Allison and Viktrovius' models on the r/GalaxyFold subreddit, I was inspired to make my own version tailored to my exact specifications.

I wanted a case that was fairly thin but also offered some protection while also not interfering with MagSafe accessories like wallets and power banks.

It also had to feel comfortable to use on a regular basis and feel like a finished product rather than a 3D printed prototype.

Finally, it of course needed to have MagSafe support so that I can use some of the MagSafe accessories I had.

Allison's model was great as a starting point since they provided the CAD file for it and Viktrovius' model had some of the ideas I already want to implement so I used a few of their dimensions with some tweaks to get things perfect for my model.

Without their effort, I wouldn't have been able to make this case so please check out their models as well and give them a like at the very least :)

---

CYA stuff

I don't make any guarantees that this case will protect your Samsung Galaxy Z Fold 7 in any shape or form from drops, scuffs, scratches, scrapes, and dings.

Therefore, by downloading, printing, and attaching this case to your phone, you agree to use this 3D printed case at your own risk.

Read more Show less

Print spec

Formats
stepstl
Model files
14
Total size
5.2 MB
Largest file
1.1 MB

0 comments

See all