Skip to main content
F3D
SBFI (Smooth Beefy Front Idlers) – Front Idlers nam châm ch… 1

2 images

Máy In 3D

SBFI (Smooth Beefy Front Idlers) – Front Idlers nam châm cho Voron 2.4 & Trident

By Radiotbo

Downloads
657
Likes
124
Views
3,747
Remixes
2

Files 20 12.5 MB

  • a_SBFI-V2.4_Front_Magnetic_Cover_x2_1767399301.stlSTL · 1 MB
  • SBFI-V2.4_Voron_Logo1_x2_1767399302.stlSTL · 684 B
  • SBFI-V2.4_Voron_Logo2_x2_1767399303.stlSTL · 684 B
  • SBFI-V2.4_Voron_Logo3_x2_1767399304.stlSTL · 684 B

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 2

See all 2 remixes

Description

Firt of all

Check out the github repository https://github.com/Radiotbo3d/SBFI

What is this?

These are replacement front idlers for Vorons (and Voron-based machines). This design is available for Voron Trident and Voron 2.4.

Improvements?

This is a version remixed/based on BFI my version has several improvements or things that I have changed to fit my needs.

Changes:

  • They are now symetrical
  • They now have a magnetic cover so you don't need to see those screws anymore
  • They now have curved edges instead of chamfers (very similar to Ramalama2)

Some more things you need to know:

All the clips for the z belts on the voron 2.4 are the exact same as the BFI

The internal bearing stack holder is also the exact same as the BFI (so if you had the BFI and you want to change to SBFI you don't need to reprint that part)

The front magnetic covers can be printed with MMU/AMS or you can print them as separate gcodes without removing the build plate after each print, or you can just print them with the negative of the voron logo (single color)

BOM

SBFI for Voron 2.4

(It's the exact same BOM as BFI but you also need 8 6x3mm magnets (4 per idler) "it will also work fine with 4 magnets (2 per idler) but I still recomend you use 8 magnets"

For V2.4, you'll need:

  • 4× M5×30 BHCS
  • 4× M5 hex nuts
  • 2× 5mm-diameter pin, 18mm long
  • 2× M3 t-nuts
  • 2× M3×16 BHCS

...plus the same shim/bearing stack setup for each idler as the original stock front idlers.

SBFI for Trident

(It's the exact same BOM as BFI but you also need 8 6x3mm magnets (4 per idler) "it will also work fine with 4 magnets (2 per idler) but I still recomend you use 8 magnets" (and the exception that you need to change the M5x40 SHCS for M5x40 BHCS)

For Trident, you'll need:

  • 4× M5×40 BHCS
  • 4× M5 hex nuts
  • 2× 5mm-diameter pin, 18mm long

...plus the same shim/bearing stack setup for each idler as the original stock front idlers.

Contributos

I want to thank everyone who has helped to develop this project.

And If someone has any suggestion for improving the design or maybe some cool features I could add, please don't hesitate to tell me.

You can either contact me through Github or through Discord "radiotbo" (I'd probably answer you faster through discord)

Read more Show less

Print spec

Formats
stepstl
Model files
20
Total size
12.5 MB
Largest file
3.6 MB

0 comments

See all