
Ốp iPod đơn giản (Thick/Thin cho iPod Classic/Video Gen 5/6/7)
- Downloads
- 3
- Likes
- 0
- Views
- 148
- Remixes
- 0
- Comments
- 0
Files 7 1.5 MB
- SIMPLE_IPOD_CASE_Thick_Frame_1767397641.stlSTL · 72.3 KB
- SIMPLE_IPOD_CASE_Thin_Frame_1767397642.stlSTL · 74.4 KB
- SIMPLE_IPOD_CASE_FACE_1767397643.stlSTL · 168.4 KB
- SIMPLE_IPOD_CASE_REAR_1767397644.stlSTL · 67.5 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #190049
- Category
- Dụng Cụ Tiện Ích
- Published
Description
3D model description
Frame for Thin or Thick Model iPod models from 2005-2013 (5th 5.5 6th &7th Gen) included.
YOU WILL NEED:
4x M3x16 or M3x17mm Screws (Thin)
4x M3x19mm or M3x20mm Screws (Thick)
4xm3 Nuts (acorn nuts give a finished look but standard nuts give a more mechanical look)
M3x16 fits thin frame without the threads sticking past the nut. M3x17 the threads stick slightly past the nut. (Same situation with the thick frame & M3x19/20.)
Acorn or Nylon Lock nuts help finish look but you may like the mechanical appearance of normal nuts as I do.
3D printing settings
Recommend .16 or .12 layer height for best look.
Use your calibrated filament settings for the filament you use.
Print spec
- Formats
- 3mfstltxt
- Model files
- 7
- Total size
- 1.5 MB
- Largest file
- 740.8 KB
0 comments
You may also like 12 models
See all-

-
New -
New -

-

-

-

-

-
New -
New -

-


