Skip to main content
F3D
Adaptor gắn loa sau cho Jaguar XJS bản Base 1

6 images

DIY

Adaptor gắn loa sau cho Jaguar XJS bản Base

By monkfe_1204924

Downloads
1
Views
37

Files 3 1.8 MB

  • Jaguar_rear_speaker_adaptor_front_4mm_1767382037.stlSTL · 361.4 KB
  • Jaguar_rear_speaker_adaptor_front_6mm_1767382038.stlSTL · 240.2 KB
  • Jaguar_rear_speaker_adaptor_rear_1767382040.stlSTL · 1.2 MB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#188375
Category
DIY
Published

Description

So this is for the Base (convertable in my case) rear speakers. The original mid range speakers were an odd specimen no longer availalbe. So what I did is I found a mid range speaker (Dayton Audio RS150-4), 6 inch and moved it forward into the bulkhead as much as possible. This is what I came up with. It works. I made this two different ways. If you're doing a complete tear down as I have, I installed those screw in wood inserts to allow me to use a machine screw to mount the speakers. This needs to be accurately drilled into the bulkhead, in this case I used 4mm hardware and it needed a 6mm drill. So use the 6mm version as you can drill right through the adaptor hole into the wood, then install your inserts. If you want to do a refit in place, I suggest using the 4mm version and use a wood or sheet metal screw right into the wood. The rear cover I plan on just using a sheet metal screw right into the wood, as I"ll be going through carpet and it might be kind of tight. Printed these in ABS at 30% infil with brims on inner and outer. At least 3 perimeters. I used these 4mm inserts in this model https://www.amazon.com/dp/B0CS6XGMFD?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Category: Other

Read more Show less

Print spec

Formats
stl
Model files
3
Total size
1.8 MB
Largest file
1.2 MB

0 comments

See all